Categories
- Cooking equipment
- Refrigeration facilities
- Stainless steel furniture
-
Bartender station (cocktail station)
- BS-1.6-2
- Bar drip tray for kegerator ST/GR-2
- Bar sink CSM-3 (CSM(S)-3)
- bar slide SLB-3-2
- bar slide SLB-3-3
- bar table BNM-2
- bar table BNM-3(S)
- base under the beer BBM-2
- base under the beer BBM-3
- BS-1.2-GR
- BS-1.4-GR
- BS-1.6-2R
- BS-1.6-GR
- BS-1.6.3 (0.7) pack 1
- BS-1.6.3 (0.7) pack 2
- BS-1.6.3 (0.7) pack 3
- BSM(S)-2
- BSM(S)-3
- BSM(W)-2
- BSM(W)-3
- BSM-2
- BSM-3
- cooled BSDC-1700DW
- Fresh juice station FS-3
- Ice storage bin IB-2
- Preparatory table with sink CSTM-3
- Preparatory table without sink TM-3
- Table for baskets of dishwasher BM-3-2
- Table for espresso machine CMB-3
- Bar sink CSM-2 (CSM(S)-2)
- Preparatory table with sink CSTM-2
- Preparatory table without sink TM-2
- Fresh juice station FS-2
- Table for espresso machine CMB-2
- Table for baskets of dishwasher BM-2-2
- speed-rack for bottles DSR-BS1.6
- speed-rack for bottles SR-BS1.6
- Bar drip tray for kegerator
- Shelf for blender BT
- Serving counters
- Equipment for fast food
Bartender station (cocktail station) cooled BSDC-1700DW
-1100x796.jpg "Bartender station (cocktail station) cooled BSDC-1700DW")
Bartender station (cocktail station) cooled BSDC-1700DW
Bartender station with dynamic cooling of drawers.
- large upper compartment for ice with heat-insulating layer and drain
- on the sides there is space for 6 x GN-1/9 gastronorm containers (toppings for cocktails)
- large sink with built-in glass rinser for quick rinsing of bar tools and rinsing of beer glasses
- PVC cutting board, sliding on guides, covering the rinser
- adjustable compartments for tetrapacks/PET bottles/glass containers
- single "Speed Rack"
- two lower pull-out drawers with cooling
- all made of the highest quality stainless steel 1.2 mm thick
- possibility of production with right-hand placement of the sink and compressor compartment
- bar station is not supplied with a mixer and GN containers